REVINEX 18KG

Emulsion that thanks to its compatibility with the Greek cements and aggregates offers unparalleled tightness, elasticity and adhesion to a multitude of building and repair uses (e.g. cement mortar, reinforcement of cemaloid, grouting, plasters, Gutters, tile adhesives, etc.)

Indicative uses
Toichopoiϊas Mortars: Use in the building mud and the creation of watertight and resistant plasters in cracks and stresses (+ Fiberglass mesh Gavazzi®)
Enriched Cement Neopress®: Waterproofing of basements, walls, tanks, pools with increased resistance to hydrostatic and negative pressure
Cement mortar: Creation of slope, exomalynsewn, loufts, ramps, grouting, pasting of tiles
Repair concrete: anticorrosive protection of metal frame, repair of damaged parts of concrete (e.g. columns, beams, steps), (+ Repair Neorep®)
Welding of old with new Beton
Floor Construction: Underfloor heating and floors with increased mechanical and chemical resistance such as industrial in garages, parking spaces, food units, laboratories etc. (+ Eurofiber® Polypropylene fibres)
Primers: Better adhesion of plaster, cement mortar, laminate materials on the substrate, stabilization and waterproofing of building surfaces (e.g. visible concrete, columns, walls, roofs, balconies)
Tile adhesive Reinforcement: Improved adhesion, waterproofing, elasticity in sensitive damp areas where tile is applied (e.g. swimming pools, bathrooms, kitchens)
Note: Revinex® is also offered for various other uses, such as primer for interior and exterior paints-coatings, colour improvement, external spatula

Properties and Benefits:
It offers absolute tightness and elasticity
Enhances the adhesion capacity of all forms of substrate
Reduces shrinkage in cement coagulation
Allows the construction of very thin coatings
Reduces mixing water for equivalent workability
Enhances abrasion resistance and prevents dust formation
Prevents the creation of capillary cracks from the expansions and contractions
Offers increased resistance to bending, tensile and frost damage
Enhances the chemical resistance of mortars in oils, fats, light acids
Technical data
Appearance: Milky liquid
Total content in solids (ISO 1625): 47 ± 1%
Exceeds the requirements of the European Norm ΕΝ 934-3, table 3
PH (Degree of alkalinity) (ISO 1148): 9-11
Viscosity (ISO 1652): 30-150 MPas
Specific weight (25 ° C): 1.01 g/cm3
Consumption: 1-5kg/sack of cement 50kg depending on
The use and intended improvement of the
Quality of Mortars
Packaging
Only available in blue Lithografa metal containers
1-5-18kg and barrels of 200kg marked with
The lot/quality control number.