It Is used as a final coating on thermal insulation plates of the certified external thermal insulation system (ETICS) MARMOLINE MONOSIS, or other external thermal insulation systems, in old and new building surfaces, suitable Prepared. It Is ideal for use on surfaces of visible concrete, plaster of final coat, old painted surfaces, cement boards, plasterboard. Due to its high elasticity, it bridges any failures in masonry surfaces (capillary cracks) that may exist in old buildings and does not allow them to appear again.
It doesn’t contain concrete.
It has elasticity.
He’s not cracking.
Excellent adhesion on any surface.
Resistance to moisture and frost.
Ease of application (ready to use).
Incomparable quality of raw materials.
Internal and external use.
How to Apply
Check and prepare the application surface
Apply One or two hand primer MARMOLINE MST 11
Application of the colour-coated resin MARMOLINE SVR 1.0-1.5-2.0-3.0 mm can be made after at least 10 days after the application of glue-coating FK 202, according to the instructions of the system MARMOLINE MONOSIS
Stir the smear SVR well in order to homogenized.
Apply evenly across the surface with a special spatula and without waiting to set it so that the layer is the size of the plaster’s grain.
Then, immediately or within a few minutes and when the smear has just started to draw (attention in the summer months), scrub with a special plastic sander or metal spatula, depending on the desired result.
-European Directive ETAG 004 for ETICS Systems. Component part of the system MARMOLINE MONOSIS ENERGY SAVING SYSTEMS ETΙCE, approved/certified with the use of insulated polystyrene plates EPS (RTD 17/0100), and the use of extruded polystyrene plates XPS (RTD 14/0214) and MW (RTD 14/0213).
-EN 15824 (External and internal coatings based on organic binders)
Granulometry: SVR 1 mm-SVR 1.5 mm-SVR 2 mm-SVR 3 mm.
Special weight of fresh mortar: SVR 1mm, 1700-2000 kg/m³. SVR 1, 5mm, 1850-2150kg/m³. SVR 2mm, 2100-2500 kg/m³. SVR 3mm, 2300-2900 kg/m³
Reaction to Fire (ΕΝ 13501-1): B-S2, D0. As part of the ETICS system “MARMOLINE MONOSIS” with EPS, class B-S1, D0. As part of the ETICS system “MARMOLINE MONOSIS” with XPS, class B-S1, D0. As part of the ETICS system “MARMOLINE MONOSIS” with MW, class A2-S1, D0
Impact Resistance (ETAG 004): Category II
Water Absorption (ΕΝ 1062-3): Class W3.
Vapour Permeability (EN ISO 7783-2): Class V2.
Adhesion (EN 1542): 0.8 MPa.
Thermal conductivity Coefficient (ΕΝ 1745): SVR 1mm: (L10, dry) = 0.85 W/mK-SVR 1.5 mm: (L10, dry) = 1.17 W/mK-SVR 2 & 3 mm: (λ10,dry) > 1.17 W/mK (tab. mean value; P = 50%.
Application Temperature: + 5 °C to + 35 °C.
How to Dispose
In various shades and granulometric measurements based on ColorMap.
In plastic containers of 20 kg.
In a pallet of 660 kg, 33 plastic containers.
In an intact packaging, in a dry environment, for 12 months from the date of production. It Must be protected from frost.
• SVR 1 (1.8-2.0 kg/m²). • SVR 1.5 (2.0-2.3 kg/m²). • SVR 2 (2.5-3.0 kg/m²). • SVR 3 (3.0-3.5 kg/m²).