STUCCO BIANCO Putty is a fine-grained spatula material for the perfect smoothing of surfaces from plaster, concrete, plasterboard and foam, in both indoor and outdoor areas to be painted. It Spreads easily on the surface without the need of priming and preparation with ladotomous. It Rubs easily, does not burst, and does not globs. The careful granulometric grading of the product ensures a very satisfactory result even on the most demanding surfaces. It’s ideal for a few days. It’s Breathable and environmentally friendly.
Easy to use.
Perfect final texture.
Resistance to moisture and frost.
Internal and external use.
How to Apply
Check the surface so that it is clean of dust, grease and loose materials.
If There are cracks in the wall, these should be repaired before the dusting is done.
Mix in a clean bucket with clean water, using a low-speed electric drill, the amount you need with a ratio of 2.5 parts of dust to 1 part of water, until a homogeneous paste without pellets is created.
Leave the mixture 5-10 minutes and stir again.
The material remains workable for about 2 hours.
With the help of metal spatula, apply a layer for priming first and then a second layer after 4-5 hours.
Turn in the usual way.
Do not use in a thickness greater than 2 mm, because there is a risk of cracking.
It Can be followed by painting the surfaces after 3 days.
European Standard EN 998-1:2010 (GP/CSII)
Maximum granule: 90 μm.
Shape: White Powder
Bulk density of dry mortar: 1,100 kg/m³
Compressive Strength at 28 days: 4.0 MPa. (ΕΝ 1015 – 11)
Bending Strength at 28 days: 1.5 MPa. (ΕΝ 1015 – 11)
Whiteness (Whiteness index ASTM 313): 95.5-96
Application Temperature: + 5 °C to + 35 °C.
How to Dispose
In bags of 20 kg.
In a pallet of 1080 kg, 54 paper sacks of 20 kg.
In Plastic bags of 5 kg.
In a carton of 20 kg, 4 sacks of 5 kg.
In an intact packaging, in a dry environment, for 12 months from the date of production.
You Need about 1 kg of mortar per m² for a thickness of 1 mm.