It Is used for repairing and restoring damaged plaster parts, in old and new constructions, on external and internal surfaces of buildings. For repairing restoration work of plaster parts. Ideal for repairing angles, as well as a restoration plaster in cases of launching of the traditional marble plaster, after the frost infestation. Its special composition makes it an indispensable tool for both professionals (painters-electricians-aluminium-plumbers) and individuals.
Fast-paced one-layer plaster
Great mechanical strength.
Strong adhesion to the substrate e.g. concrete, bricks, DOW insulation, Neurometal, plastic or metal pipes etc.
Excellent adhesion and cooperation with the old plaster.
Reinforcement of the resistance of masonry in the area of application.
Ease of application even from non-professionals.
Great resistance to ageing.
Resistance to temperature fluctuations.
How to Apply
Clean the area to be repaired from damaged plaster parts by means of suitable tools in wide width. This can be easily understood by tapping or using a tool, the worn plaster to understand whether it is healthy or “deaf”.
Then, with the help of hard brush and water, clean thoroughly the loose materials, powders, etc.
Mix well with the hand or cement mixer a sack with the necessary amount of water, about 5 lt, depending on the desired workability. This process is simplified with the use of the special machinery available to the company
If the substrate of masonry (brick) has cracks repair it locally.
Soak the surface with water.
Apply with trowel or by hand in a layer up to 2 cm
For the reinforcement of plaster parts to be repaired, in joints of different structural elements, in insulating and where necessary, use MARMOLINE fiberglass.
For Difficult repairs and further improvement of welding and elasticity properties, the addition of MARMOLINE MP 20 resin is recommended.
After application gives surface ready for spatula and painting
Mixing Water: 5.0-5.5 lt/bag 25 kg.
European Standard EN 998-1:2010 (R/CSII)
Granulometry: 0-1.2 mm.
Specific weight of fresh mortar: 1630 kg/m³.
Compressive Strength at 28 days: 3.0 MPa. (CSII Class) (ΕΝ 1015 – 11)
Bending Strength at 28 days: 1.2 MPa. (ΕΝ 1015 – 11)
Application Temperature: + 5 °C to + 35 °C.
How to Dispose
In bags of 25 kg.
In a pallet of 1350 kg, 54 bags of 25 kg.
In Plastic bags of 5 kg.
In a pallet of 960 kg, 48 boxes of 20 kg.
In an intact packaging, in a dry environment, for 12 months from the date of production.
You Need about 12-14 kg of mortar per m² for plaster of 1 cm thickness.