It Is used as a single layer plaster on external and internal surfaces after the peck plaster of high strength (SV 1). It Replaces the lasso and the marble combining both in one layer. It is Applied as the basic plaster and is rubbed like marble. The application thickness must not exceed 2 cm. Due to the nature and fine granulometry of the marble content of Dionysos (< 1.2 mm) it gives a white and smooth final surface ready for sanding and dyeing. In Special cases the product can be enhanced by adding MARMOLINE MP 20 resin.
Advantages
High durability.
Excellent adhesion.
Resistance to moisture and frost.
Internal and external use.
Preparation Speed-Ease of application.
Excellent workability.
Increased productivity-Labor Reduction.
Smooth-White surface.
Stable quality.
How to Apply
Check the application surface if it is clean and if preceded Peck SV1
The surface to be plastered should be preceded by good wetting, especially during the summer months
Mix by hand or using special machines (mixer-presses) available in MARMOLINE.
Place MARMOLINE corner inside. The use of angular contact increases the performance of the application while ensuring the resistance of the corners to the small blows and the flawless aesthetics of the final surfaces.
Avoid the use of removable metal guides by using the galvanized metal guides MARMOLINE. If this is not feasible, a good filling of the groove created after the removal of the guides should be done to avoid cracking
The use of other materials for the fastening of guides and angular helmets, such as gypsum, etc. is Prohibited.
It is Applied with the continuous mixing machine and with all the corresponding types of machines. For small Surfaces (Mermetia) The material can be applied by hand.
Weight | 40 kg |
---|
Related products
-25%
-25%
-25%
-40%
-25%
-35%
-25%
-40%