• Repairing mortar for concrete imperfections
• Repair of problematic concrete equipment, exposed to oxidative or marine environment.
• Groove Configuration
• Repair of Masonry
Hygrosmart ®-BUILDING-F is applied at a temperature of over 5 °c and a maximum of 35 °c.
• Easy to apply
• Big Time workability
• Excellent adhesion to building materials
• High strength
• Paints in a few hours after application
• No Rigmatwnetai
We clean the surface of loose materials, powders, plant organisms, salts, oils. The substrate surface must be wetted well before application.
If there are exposed sidiroplismoi, they should be thoroughly cleaned by rust and passed with a special rust cement-mothproof paint.
Mixing – Application:
Hygrosmart ®-BUILDING-F (25kg) is gradually added under mechanical stirring to 4.5-5 Kg of water or until a homogeneous mixture is formed.
Allow the mixture to settle for about five minutes and stir again.
The wetted application surface and the material are applied with a spatula or trowel in one or more layers. The thickness of each layer can be up to 20 mm. The life time of the mixture in the container is approximately 90 minutes. Once the Piximatos process has started, it can be rubbeded to enhance the adhesion of the second layer (grating can be done with a taco made of expanded polystyrene or sponge or trowel depending on the final surface we want to achieve).
In case of application of the material in days with high temperatures or dry air, keep the material moist basting it with water. The applied material must be protected from rain or frost for at least 10 hours. The temperature during application must be + 5 to + 35 °c at least.
Consumption: 1.7 kg/m2/mm.