It Is used in the application of the technique of three coats, as a final coat of plaster (marble) on external surfaces, which have previously been leveled with the base layer plaster (SV 2). Ideal for cases where additional protection from moisture (seaside houses, islands, mountainous-semi-mountainous areas etc.) is required. It Gives a white and smooth final surface ready for sanding and dyeing, thanks to the nature and fine granulometry of the marble content of Dionysos (< 1.2 mm). In Special cases the product can be further enhanced with the addition of MARMOLINE MP 20 resin.
Resistance to moisture and frost.
Internal and external use.
Ease and speed of application
How to Apply
Apply after the base layer Plaster SV 2 (or TL 2) and after it has completely dried, (15-20 days summer, more than 1 month winter).
Check the surface to plastering to be clean and free from loose materials and corrode the
Stir by hand or in concrete mixer or with press
If you want to give color to the product, use the natural pigments POWDER COLOUR following their instructions for use
It is Applied with continuous mixing machines of M-TEC, available to the company and the respective types of machines or by hand.
Apply the ready plaster to a layer of approximately 0.5 cm thick, and set with the bar.
Let the plaster draw. Then it can be sanded with a wet sander and give the desired surface.
For the next 2 – 3 days, especially in summer, a frequent soaking of the plaster is recommended to eliminate the likelihood of cracking
The work Is not interrupted on single surfaces to prevent shadows from appearing.
Mixing Water: 5-6 lt/sack.
European Standard EN 998-1:2010 (GP/CSIII/W2)
Granulometry: 0-1.2 mm.
Form: White powder.
Specific weight of fresh mortar: 1700 kg/m³
Compressive Strength at 28 days: 6.0 MPa. (ΕΝ 1015 – 11)
Bending Strength at 28 days: 1.5 MPa. (ΕΝ 1015 – 11)
Water Absorption: 0.14 kg/m². Min ⁰ ﮲ ⁵ (W2) (ΕΝ 1015-18)
Application Temperature: + 5 °C to + 35 °C.
How to Dispose
In bags of 25 kg.
In a pallet of 1500 kg, 60 paper bags of 25 kg.
In magnacous of 1000 kg.
In Bulk in silos with a capacity of 12-18-22 m³.
In an intact packaging, in a dry environment, for 12 months from the date of production.
You Need about 6-7 kg of mortar per m² for plaster of 0.5 cm thick.