FLEX 2000 ELASTIC REINFORCED RESIN TILE ADHESIVE (C2TES1) 25KG

Strong welds of tiles of all types such as: ceramics, Porcelanato, tiles of low and zero absorbency, marble and granite, glass products, mosaics, Karystos plates or other natural materials. Application on any substrate plaster, concrete, cement, on floor or wall, indoor or outdoor, even on heated floors with underfloor heating, Jacuzzi, steam bath, swimming pools. For application on plasterboard, it must precede their priming with the acrylic water primer MARMOLINE MST 11. For application on mosaics, old marbles or tiles, it must precede priming of the surface with the quartz adhesion primer MARMOLINE PRO CONTACT.
Advantages
Particularly strong welds with elastic characteristics
No slip of tiles are observed when they are placed
High resistance to temperature fluctuations (heat-cold) and moisture
Incomparable Quality of raw materials
Ease of application
Excellent workability
Internal and external use
How to Apply
Check the surface so that it is clean of dust, grease and loose materials.
If the substrate is flimsy or rubbed, it is suggested priming the surface with the acrylic water primer MARMOLINE MST 11
Mix well with a low-speed electric drill, a 25 kg sack with about 7 liters of clean water.
Leave the mixture for 5 -10 minutes, to mature, and then stir again
Apply the adhesive with the help of an appropriate toothed spatula (whose size you choose depending on the substrate and the type of the tile) evenly across the surface of the substrate.
The dimensiined mixture must be covered with tiles within a time of 30 minutes from the spreading of the adhesive and in any case before the crust (film) is created on its surface.
Place the tiles by applying pressure to them.
The adhesive remains working in the container for 3-4 hours depending on the season, temperature and humidity of the environment. When the glue starts to tighten, then you have to shuffle it again without adding water.
The grouting of the tiles can be done 24 hours (for the floors) and 12 hours (for the walls).
Mixing Water: 7 lt per 25 kg powder.
Specifications
European Standard EN 12004 (C2TES1)

Color: White
Detachment Strength (ΕΝ 1348)-Average values based on laboratory measurements of production control: In concrete after 28 days: 1.8 N/mm ²/After Heating at 70 °C: 1.6 N/mm ². /After Immersion: 1.6 N/mm ². /After 25 Cooling-Defrost cycles: 1.3 N/mm ².
Slip (EN 1308): < 0.5 mm.
Transverse Distortion (EN 12002): 4.0 mm (S1)
Open application Time: 30-40 minutes.
Microcorrections Time: 10 minutes.
Application Temperature: + 5 °C to + 35 °C.
How to Dispose
In bags of 25 kg. In a pallet of 1500 kg (60 paper sacks).
In Plastic bags of 5 kg. In a pallet of 960 kg (48 boxes of 20 kg).
Save
In an undamaged packaging, in a dry environment, for 12 months from the date of production
Consumption
You Need about 2.5-4.0 kg per m² depending on the size and type of the tile.