It Is used for filling, levelling and laying on floors, giving ready final surface for the placement of ceramic tiles, marbles or granites. Suitable for use in both indoor and outdoor areas (balconies, roofs, terraces, etc.). It Is also used for filling on underfloor heating systems. It does not crack and does not affect the piping. The Recommended application thickness is 3 to 15 cm.
Resistance to moisture and frost.
Excellent final surface.
Internal and external use.
Preparation Speed-Ease of application.
How to Apply
Check the surface to be clean and free from grease and loose materials.
It is Recommended to soaking the substrate before application
Mix well with the hand or cement mixer, a sack with the necessary amount of water. The process is simplified by the use of the special machinery available to the company
The amount of water added is proportional to the desired liquidity. It is Recommended to add 5 – 5.5 kg of water for a sack of 40 kg.
When you want to give out, reduce the amount of water
Place each room separately, placing wooden slats 1 cm thick on the doors. Then remove the slats and create a tank which should not be filled. On large surfaces It is recommended to create expansion joints per 20 m²
The time of Patness is at least 12 hours and the placement of marbles or tiles is done after 48 hours
Recommended application thickness is 3 to 15cm
Mixing Water: 5-5.5 lt/sack.
European Standard EN 13813 (CT-C12-F4)
Granulometry: 3 mm.
Specific weight of fresh mortar: 2000 kg/m³.
Compressive Strength at 28 days: “12.0 MPa. Category C12. (13892 Method – 2)
Bending Strength at 28 days: “4.0 MPa. Category F4. (13892 control Method – 2)
Application Temperature: + 5 °C to + 35 °C.
How to Dispose
In bags of 40 kg.
In a pallet of 1400 kg, 35 paper sacks of 40 kg.
In magnacous of 1000 kg.
In Bulk in silos with a capacity of 12-18-22 m³.
In an intact packaging, in a dry environment, for 12 months from the date of production.
You Need about 16-17 kg of mortar per m² for 1 cm thickness.